注意: 此页面尚未翻译成中文。以下内容为英文原版。

​
Introduction

Here, we’ll be installing quai-gpu-miner, the implementation of a Quai Network ProgPOW miner. This tutorial focuses on installing and running quai-gpu-miner on HiveOS using a Flight Sheet. HiveOS also provides a web based dashboard for streamlined management and maintenance of your Quai Network GPU miner.

​
Requirements

In order to run the quai-gpu-miner on HiveOS and mine valid blocks, you’ll need the following:

Synced go-quai node

Configured Stratum proxy

HiveOS machine

NVIDIA or AMD GPU

4GB+ of RAM

​
Environment Setup

​
HiveOS

For this tutorial, you’ll need a HiveOS machine. Instructions for how to install HiveOS on your rig and configure it can be found on the HiveOS installation documentation.

​
Dashboard

Once you’ve installed HiveOS, configure your GPU workers into a Farm. Once configured, you’ll be able to manage workers from a HiveOS dashboard and utilize Flight Sheets.

​
Installation

To start the Flight Sheet installation, open up your HiveOS Farm Dashboard.
1

Add Wallet

In the farm menu, click the wallets tab.
On the right side of the page, click the add wallet button.
Fill in the wallet information:
  • For the Coin field, type Quai then click on the Create Quai option in the drop-down menu.
  • In the Address field, copy/paste your Quai wallet address. (This address is not used by the miner, so you can put any address here.)
  • For Name field, choose a name for your wallet.
To finish creating the wallet, click “Create” in the bottom right corner.
2

Add Flight Sheet

In the farm menu, click the flight sheets tab.
Click “add flight sheet”. Fill out the flight sheet information:
  • For the Miner name, type quai_custom.
  • For the Installation URL, paste in the URL for your card type:
https://github.com/dominant-strategies/quai-gpu-miner/releases/download/v0.4.1/quai-gpu-miner-nvidia-v0.4.1.tar.gz
  • For the Hash algorithm, type progpow.
  • For the Wallet and worker template, type %WAL%.%WORKER_NAME%.
  • For the Pool URL, type stratum://EXTERNALIPADDRESS:PORT.
For the Extra config arguments, enter the following depending on your graphics card type:
-U --HWMON 1 -P stratum://EXTERNALIPADDRESS:PORT
On bottom right corner, click “Apply Changes”.